Flowline US06-0003-00 EchoPod Level Transmitter | Liquid Level Control
Flowline US06-0003-00 EchoPod Level Transmitter for Reliable Tank Level Measurement, Monitoring and Process Control
Use Flowline US06-0003-00 EchoPod Level Transmitter for industrial level applications. Confirm range, mounting, output and process compatibility
Flowline US06-0003-00 for Liquid Level Systems
The Flowline US06-0003-00 is a Reflective Ultrasonic Multi-Function Liquid Level Transmitter designed for industrial liquid-level measurement, monitoring or control applications. Use the exact model number when comparing replacement or new-installation requirements, because connection, output, range and enclosure options can vary across Flowline configurations.
Performance and Construction Highlights
- Offered in 6m (19.6’) and 12m (39.3’) measurement ranges
- Reflective Technology™ measures reliably with condensation
- Corrosion resistant PVDF transducer with aluminum enclosure
- Narrow 3” (7.6cm) beam width for applications with limited space
- LCD display indicates level in inches, meters or percent of span
- HART communication in point to point and multi-drop modes
System Integration
Match the model to the controller, PLC, relay, display or other receiving equipment used in the system. Confirm signal type and power requirements from the product documentation before wiring. Mechanical fit and process compatibility should also be verified before installation.
Before purchase, compare the complete model code with the application requirements. Check tank dimensions, process connection, wetted materials, power or signal needs, measurement range and environmental conditions where those values apply. This helps prevent selecting a similar-looking Flowline model with a different configuration.
Service-Friendly Ordering
For maintenance teams, integrators and OEM users searching for Flowline US06-0003-00, the model-specific identification makes it easier to match the product to a documented Flowline level-control system without relying on appearance alone.
For replacement work, record the existing model number and wiring or mounting arrangement before removal. For new projects, review the documented installation guidance and leave adequate clearance around the sensing area. Commission the device using the applicable Flowline instructions and verify the output or switching behavior before returning the process to normal operation.
| Part No | US06-0003-00 |
|---|---|
| Brand | Flowline |
| Product Type | Level Transmitter |
| Product Family | EchoPod |
| Range | 8” to 19.6’ (20cm to 6m) |
| Accuracy | ± 0.2% of range |
| Resolution | 0.079” (2mm) |
| Dead Band | 8” (20.3cm) |
| Beam Width | 3” (7.6cm) |
| Configuration | Push button; WebCal® PC Windows®USB® 2.0; HART 7 |
| Memory | Non-volatile |
| Display Type | LCD, 6-digit |
| Display Units | Inch, cm or percent |
| Supply Voltage | 14-28 VDC |
| Max Consumption | - |
| Loop Resistance | 500 ohms @ 24 VDC |
| Signal Output | 4-20mA, two-wire |
| Signal Invert | 4-20mA or 20-4mA |
| Signal Fail-safe | 4mA, 20mA, 21mA, 22mA, hold last |
| Process Temperature(F) | -40º to 176º |
| Process Temperature(C) | -40º to 80º |
| Temperature Comp | Automatic |
| Ambient Temperature(F) | -40º to 176º |
| Ambient Temperature(C) | -40º to 80º |
| Pressure | 30 psi (2 bar) |
| Enclosure Rating | Type 4X (IP66) |
| Enclosure Material | Aluminum |
| Enclosure Cap Material | - |
| Enclosure Vent | Water tight membrane |
| Conduit Entrance | 1/2in NPT |
| Transducer Type | Reflective |
| Transducer Material | Polyvinylidene Fluoride |
| Process Mount | 2” NPT |
| Mount Gasket | N/a |
| Classification | Intrinsically safe |
| Approval | CSA for Canada: Class I, Division 1, Groups A, B, C and D T4; Class II, Division 1, Groups E, F and G T4; Class III, T135C; Ex ia IIC T4 Ga; Ex ia IIIC, T135C Da; CSA for U.S.: Class I, Division 1, Groups A, B, C and D T4; Class II, Division 1, Groups E, F and G T4; Class III, T135C; Class I, Zone 0, IIC AEx ia T4 Ga; Class II, Zone 20, IIC AEx ia, T135C Da |
| Compliance | CE, RoHS |
| Entity Parameters | Install per control drawing #600820 |
| USB Adapter | w/o Fob |
| Series | US06-12 |
| Type | Level Transmitter |
