Flowline US01-0001-01 EchoPod Level Transmitter | Liquid Level Control
Flowline US01-0001-01 EchoPod Level Transmitter for Reliable Tank Level Measurement, Monitoring and Process Control
Use Flowline US01-0001-01 EchoPod Level Transmitter for industrial level applications. Confirm range, mounting, output and process compatibility
Flowline US01-0001-01: Selection and Application Guide
The Flowline US01-0001-01 is a Reflective Ultrasonic Multi-Function Liquid Level Transmitter designed for industrial liquid-level measurement, monitoring or control applications. Use the exact model number when comparing replacement or new-installation requirements, because connection, output, range and enclosure options can vary across Flowline configurations.
Specification Snapshot
- Resolution: =0
- Dead Band: maximizes tank filling capacity
- Beam Width: for applications with limited space
- Material: Polypropylene
- Process Mount: 2in NPT
- Supply Voltage: 14-28 VDC
- Enclosure Rating: Type 6P (IP68)
- Memory: Non-volatile
- Output: 4-20mA, two-wire
- Type: Level Transmitter
Customer Selection Notes
Before purchase, compare the complete model code with the application requirements. Check tank dimensions, process connection, wetted materials, power or signal needs, measurement range and environmental conditions where those values apply. This helps prevent selecting a similar-looking Flowline model with a different configuration.
Installation and Commissioning
For replacement work, record the existing model number and wiring or mounting arrangement before removal. For new projects, review the documented installation guidance and leave adequate clearance around the sensing area. Commission the device using the applicable Flowline instructions and verify the output or switching behavior before returning the process to normal operation.
Maintenance Considerations
During service, inspect mounting threads, seals, wiring, cable entries and nearby process hardware as applicable. If the product is being replaced because of unstable readings or switching, verify the installation conditions before assuming the instrument itself is the only cause.
For maintenance teams, integrators and OEM users searching for Flowline US01-0001-01, the model-specific identification makes it easier to match the product to a documented Flowline level-control system without relying on appearance alone.
| Part No | US01-0001-01 |
|---|---|
| Brand | Flowline |
| Product Type | Level Transmitter |
| Product Family | EchoPod |
| Type | Level Transmitter |
| Range | 1.5” to 4.9’ (3.8cm to 1.5m) |
| Accuracy | 0.125in (3mm) |
| Resolution | 0.019” (0.5mm) |
| Dead Band | 1.5in (3.8cm) |
| Beam Width | 2in (5cm) |
| Configuration | WebCal® PC Windows® USB® 2.0 |
| Memory | Non-volatile |
| Supply Voltage | 14-28 VDC |
| Consumption | - |
| Loop Resistance | 500 ohms @ 24 VDC |
| Signal Output | 4-20mA, two-wire |
| Signal Invert | 4-20mA or 20-4mA |
| Signal Fail-safe | 4mA, 20mA, 21mA, 22mA, Hold last |
| Contact Type | - |
| Contact rating | - |
| Contact fail-safe | - |
| Hysteresis | - |
| Process Temperature (F) | -40° to 176° |
| Process Temperature (C) | -40° to 80° |
| Ambient Temperature (F) | -31° to 140° |
| Ambient Temperature (C) | -35° to 60° |
| Pressure | 30 psi (2 bar) |
| Enclosure Rating | Type 6P (IP68) |
| Enclosure Material | Polypropylene |
| Transducer Type | Reflective |
| Transducer Material | Polyvinylidene Fluoride |
| Cable Jacket Material | Polyurethane |
| Cable Type | 4-conductor, Shielded |
| Cable Length | 48in (1.2m) |
| Process Mount | 2in NPT |
| Mount Gasket | N/a |
| Classification | Intrinsically Safe |
| Compliance | Automatic |
| Temp. comp | CE, RoHS |
| Approvals | CSA for Canada: Class I, Division 1, Groups A, B, C and D T4; Class II, Division 1, Groups E, F and G T4; Class III, T135C; Ex ia IIC T4 Ga; Ex ia IIIC, T135C Da; CSA for U.S.: Class I, Division 1, Groups A, B, C and D T4; Class II, Division 1, Groups E, F and G T4; Class III, T135C; Class I, Zone 0, IIC AEx ia T4 Ga; Class II, Zone 20, IIIC AEx ia, T135C Da |
| Entity parameters | Install per control drawing #610125 |
| USB Adapter | w/Fob |
| Series | US01-03 |
