Flowline LI40-1001 Level Indicator
Flowline LI40-1001 PodView® Level Indicator is a general-purpose digital level indicator designed for use with Flowline EchoPod ultrasonic level sensors. It displays tank level or volume in engineering units, shows relay status, and allows field adjustment of sensor set points without requiring additional programming. The unit is powered directly by the connected EchoPod sensor and features a rugged NEMA 4 / IP65 enclosure for industrial applications.
Application The general purpose indicator displays tank level or volume in engineering units with 1-4 relay status indicators, and is compatible with any EchoPod level sensor that's been configured with WebCal 6 software and updated to V50 firmware or higher. Powered by EchoPod, the field mount indicator may be located up to 4.5m (15') from the sensor. PodView requires no programming. The indicator repeats the measured value, applicable relay status and set point configuration of the attached sensor. If EchoPod relay set point changes are desired, they can be easily made through the field indicator. Features : Indicates tank level or volume and relay status Enables EchoPod relay set point changes in the field Powered directly by the attached EchoPod sensor Corrosion resistant enclosure with NEMA 4 faceplate Compatibility : EchoPod sensors operating on V50 firmware or higher V50 firmware is available via WebCal 6 software or higher Maximum distance between PodView & EchoPod is 4.5m(15")
| Brand | Flowline as configured: |
|---|---|
| Product Type | Controller as configured: |
| Mounting | Panel Mount as configured: |
| Max Temperature | 140°F (60°C) as configured: |
| Voltage | Provided by EchoPod as configured: |
| Cable Length | 6ft (1.8m) as configured: |
| Cable Type | 4-conductor, #22 AWG as configured: |
| Enclosure | Nema 4 (IP65) faceplate as configured: |
| Cable Material | Polyurethane as configured: |
| Display Type | LCD, 6-digit with 4 relay indicators as configured: |
| Enclosure Material | Polycarbonate as configured: |
| Sensor Inputs | EchoPod sensor as configured: |
| Notes | Podview Level Indicator, LCD 6 Digit Display, 6' 4 Conductor Wire, Polyurethane Cable Jack as configured: |
