Flowline LZ12-1405 Level Switch | Liquid Level Control System
Flowline LZ12-1405 Level Switch for Industrial Liquid Level Monitoring, Tank Automation and Process Control
Use Flowline LZ12-1405 Level Switch for industrial level applications. Confirm range, mounting, output and process compatibility before purchase.
Flowline LZ12-1405 for Liquid Level Systems
The Flowline LZ12-1405 is a Switch-Tek Vibration Level Switch designed for industrial liquid-level measurement, monitoring or control applications. Use the exact model number when comparing replacement or new-installation requirements, because connection, output, range and enclosure options can vary across Flowline configurations.
Performance and Construction Highlights
- Automatic coating adjustment optimizes sensor performance
- Submersible Ryton sensor with polypropylene cable for corrosive liquids
- Coating alarm proactively alerts user when cleaning is required
- 60VA relay selectable NO or NC via power supply wiring polarity
- Compatible with Smart Trak and Switch-Pak installation fittings
System Integration
Match the model to the controller, PLC, relay, display or other receiving equipment used in the system. Confirm signal type and power requirements from the product documentation before wiring. Mechanical fit and process compatibility should also be verified before installation.
Before purchase, compare the complete model code with the application requirements. Check tank dimensions, process connection, wetted materials, power or signal needs, measurement range and environmental conditions where those values apply. This helps prevent selecting a similar-looking Flowline model with a different configuration.
Service-Friendly Ordering
For maintenance teams, integrators and OEM users searching for Flowline LZ12-1405, the model-specific identification makes it easier to match the product to a documented Flowline level-control system without relying on appearance alone.
For replacement work, record the existing model number and wiring or mounting arrangement before removal. For new projects, review the documented installation guidance and leave adequate clearance around the sensing area. Commission the device using the applicable Flowline instructions and verify the output or switching behavior before returning the process to normal operation.
| Part No | LZ12-1405 |
|---|---|
| Brand | Flowline |
| Product Type | Level Switch |
| Orientation | Universal |
| Accuracy | +/- 1mm in water |
| Repeatibility | +/- 0.5mm in water |
| Supply voltage | 12-30 VDC |
| Consumption | 25 mA maximum |
| Contact type | SPST relay |
| Contact rating | 60 VA, 1A maximum |
| Contact output | Selectable NO / NC |
| Maint. alarm | NPN transistor, 10 mA maximum |
| Process temperature | F: -40° to 176°, C: -40° to 80° |
| Pressure | 150 psi (10 bar) @ 25° C, derated @ 1.667 psi (0.113 bar) per °C above 25° C |
| Sensor rating | NEMA 6 (IP68) |
| Sensor material | Ryton (glass filled) |
| Grommet material | Viton |
| Cable jacket | Polypropylene |
| Cable type | 5-conductor, shielded #24 AWG |
| Cable length | 10ft (3m) |
| Process mount | 3/4in NPT (3/4in G) |
| Mount gasket | Viton |
| Classification | General purpose |
| Compliance | CE |
