Flowline LV20-1201 Level Switch | Liquid Level Control System

Flowline LV20-1201 Level Switch | Liquid Level Control System

Flowline LV20-1201 Level Switch for Industrial Liquid Level Monitoring, Tank Automation and Process Control
SKU:LV20-1201
Model Number: LV20-X201
$45.000

Use Flowline LV20-1201 Level Switch for industrial level applications. Confirm range, mounting, output and process compatibility before purchase.


WHERE TO BUY?
Overview
Specification
Documents
Accessories
Overview

Flowline LV20-1201: Selection and Application Guide

The Flowline LV20-1201 is a Switch-Tek Mini-Float Level Switch designed for industrial liquid-level measurement, monitoring or control applications. Use the exact model number when comparing replacement or new-installation requirements, because connection, output, range and enclosure options can vary across Flowline configurations.

Specification Snapshot

  • Accuracy: +/- 5mm in water
  • Material: PP
  • Process Mount: 1/8 in NPT
  • Output: Selectable NO / NC
  • Orientation: LV20: +/- 20° vertical
  • Repeatability: +/- 2mm in water
  • Specific gravity: 0.8 minimum
  • Contact type: SPST reed
  • Contact rating: 120 VAC/VDC @ 50 VA
  • Contact output: Selectable NO / NC

Customer Selection Notes

Before purchase, compare the complete model code with the application requirements. Check tank dimensions, process connection, wetted materials, power or signal needs, measurement range and environmental conditions where those values apply. This helps prevent selecting a similar-looking Flowline model with a different configuration.

Installation and Commissioning

For replacement work, record the existing model number and wiring or mounting arrangement before removal. For new projects, review the documented installation guidance and leave adequate clearance around the sensing area. Commission the device using the applicable Flowline instructions and verify the output or switching behavior before returning the process to normal operation.

Maintenance Considerations

During service, inspect mounting threads, seals, wiring, cable entries and nearby process hardware as applicable. If the product is being replaced because of unstable readings or switching, verify the installation conditions before assuming the instrument itself is the only cause.

For maintenance teams, integrators and OEM users searching for Flowline LV20-1201, the model-specific identification makes it easier to match the product to a documented Flowline level-control system without relying on appearance alone.

Specification
Part NoLV20-1201
BrandFlowline
Product TypeLevel Switch
OrientationLV20: +/- 20° vertical
Accuracy+/- 5mm in water
Repeatability+/- 2mm in water
Specific gravity0.8 minimum
Contact typeSPST reed
Contact rating120 VAC/VDC @ 50 VA
Contact outputSelectable NO / NC
Process temperatureF: -40° to 176° C: -40° to 80°
Max. pressure10 psi (0.7 bar)
Sensor ratingNEMA 6 (IP68)
Sensor materialLV20-12X1: Polypropylene, LV20-52X1: PVDF
Wire jacket materialLX2X-12X1: PVC LX2X-52X1: TFE
Wire type2-conductor, #22 AWG
Wire length2ft (61cm)
Process mount1/8 in NPT
ClassificationGeneral purpose
ComplianceCE
Documents

Related Documents List

Accessories
Flowline LM94-1001 Flowline Component | Liquid Level Control
Flowline LM95-1001 Flowline Component | Liquid Level Control