Flowline LU20-5061-IS EchoTouch Ultrasonic Level Transmitter | Liquid
Flowline LU20-5061-IS EchoTouch Ultrasonic Level Transmitter for Industrial Liquid Level Monitoring, Tank Automation
Use Flowline LU20-5061-IS EchoTouch Ultrasonic Level Transmitter for industrial level applications. Confirm range, mounting, output and process
Flowline LU20-5061-IS EchoTouch Ultrasonic Level Transmitter
The Flowline LU20-5061-IS is a Ultrasonic Level Transmitter EchoTouch Ultrasonic Level Transmitter, Process mount 2" G (Metric), Supply voltage 12-32 VDC, Memory Non-volatile designed for industrial liquid-level measurement, monitoring or control applications. Use the exact model number when comparing replacement or new-installation requirements, because connection, output, range and enclosure options can vary across Flowline configurations.
Key Product Details
- Range: filters eliminate false echo returns
- Accuracy: +/- 0
- Resolution: 0
- Dead Band: and range filters eliminate false echo returns
- Beam Width: 8°
- Material: PVDF
- Process Mount: 2" G (Metric)
- Supply Voltage: 12-32 VDC
- Enclosure Rating: NEMA 4X (IP65)
- Memory: Non-volatile
Before purchase, compare the complete model code with the application requirements. Check tank dimensions, process connection, wetted materials, power or signal needs, measurement range and environmental conditions where those values apply. This helps prevent selecting a similar-looking Flowline model with a different configuration.
Application and Installation Planning
For replacement work, record the existing model number and wiring or mounting arrangement before removal. For new projects, review the documented installation guidance and leave adequate clearance around the sensing area. Commission the device using the applicable Flowline instructions and verify the output or switching behavior before returning the process to normal operation.
Why Model Verification Matters
For maintenance teams, integrators and OEM users searching for Flowline LU20-5061-IS, the model-specific identification makes it easier to match the product to a documented Flowline level-control system without relying on appearance alone.
| Part No | LU20-5061-IS |
|---|---|
| Brand | Flowline |
| Product Type | Ultrasonic Level Transmitter |
| Product Family | EchoTouch |
| Range | 6 in to 18 ft (15cm to 5.4m) |
| Accuracy | +/- 0.25% of range |
| Resolution | 0.125″ (3mm) |
| Dead band | 6″ (15cm) |
| Beam width | 8° Conical |
| Configuration | Push button |
| Memory | Non-volatile |
| Display type | LCD, 4-digit |
| Display units | Inch or cm |
| Supply voltage | 12-32 VDC |
| Loop resist. | 600 Ohms @ 24 VDC |
| Signal output | 4-20 mA, two-wire |
| Signal invert | 4-20 mA, 20-4 mA |
| Signal fail-safe | Reverts to safe state during echo loss |
| Process temp. | F: -4° to 140°, C: -20° to 60° |
| Temp. comp. | Automatic |
| Ambient temp. | F: -40° to 140°, C: -40° to 60° |
| Pressure | 30 psi (2 bar) @ 25° C, derated @ 1.667 psi (.113 bar) per °C above 25° C |
| Enclosure rating | NEMA 4X (IP65) |
| Enclosure mat. | PP, UL94VO |
| Conduit entrance | Single, 1/2in |
| Trans. material | PVDF |
| Process mount | 2 in NPT (2 in G) |
| Mount gasket | Viton |
| Classification | Intrinsically safe |
| Compliance | CE |
| Approvals | CSA: Class I, Groups A, B, C, D; Class II, Groups E, F, G; Class III; T3C |
| Parameters | CSA: Vmax < 32.0 V; Imax < 130 mA; Ca = 0 uF; La = 0 uH |
| Certificate | CSA: LR 79326 |
| Type | Ultrasonic Level Transmitter |
| Series | LU20 |
