
Flowline LR80-0000 Level Sensor
SKU:LR80-0000
$835.00
4-20 mA output, 8° beam angle, measuring range up to 32.8' liquids (16.4 solids), 1.5 NPT mount, 32.8' of PVC cable, vertical orientation, Bluetooth App configuration
With a 4-20 mA signal output, the LR80 general purpose 80 GHz radar sensor enables continuous level monitoring up to 32.8' (10m) for liquids and 16.4' (5m) for solids. The sensor is wirelessly programmed over Bluetooth using our LevelTapTM App, which allows you to monitor the level, confirm the status, and adjust the settings of linked sensors. Water, chemical, petroleum-based liquids, pellet, grain, powder, or aggregate solids with dielectric constant values of 1.6 are all measured by the sensor. Choose this sensor for applications such as tank, sump, lift station, weir, canal, reservoir, bin, conveyor, or transfer station.Features:The 80 GHz technology ensures dependable, maintenance-free operation.Level height, air gap, tank volume, or open channel flow are all measured.For corrosive liquids or solids, a tough PVDF antenna and housing are required.Sensor certified IP68 for tough outdoor or below-grade installations.10m PVC jacketed shielded cable for corrosive level situationsThe theoretical fill capacity of small tanks is maximized when there is no dead band.Measure through the top wall of plastic or fiberglass tanks if desired.Bluetooth wireless setup with the LevelTapTM mobile AppLowest affordable radar sensor for your entry-level needs
| Brand | Flowline |
|---|---|
| Product Type | Sensor |
| Max Pressure | -14.5 to 43.5 psi (-1 to 3 bar) |
| Enclosure | Type 6P (IP68) |
| Conduit Entrance | 1” NPT or 1” G |
| Configuration | LevelTap™ App (iOS & Android) |
| Dead Band | 0” (0mm |
| Enclosure Material | PVDF (pigmented polyvinylidene fluoride) |
| Signal Output | 4-20 mA, two-wire |
| Range | Liquid: 32.8’ (10m), Solids: 16.4’ (5m) |
| Documentation | Flowline Pulse Radar Liquid Level Sensor Documents |
| Process Mount | 1 1/2” NPT or 1 1/2” G |

