Flowline LP15-1405 Level Switch
SKU:LP15-1405
$355.00
The Flowline LP15-1405 general purpose guard capacitance point level switch provides reliable high or low liquid level detection of water based conductive liquids with light coating, crystallizing or scaling characteristics with a 1A relay output. Media examples include copper sulfate and brine. The RF guard circuit eliminates the coating signal path between the active and reference electrodes. The submersible polypropylene liquid level sensor is universally mounted through non-metallic tank walls or inside the tank as a high level alarm or low level alarm.
WHERE TO BUY?
Application The general purpose guard capacitance point level switch provides reliable high or low liquid level detection of water based conductive liquids with light coating, crystallizing or scaling characteristics with a 1A relay output. Media examples include copper sulfate and brine. The RF guard circuit eliminates the coating signal path between the active and reference electrodes. The submersible polypropylene liquid level sensor is universally mounted through non-metallic tank walls or inside the tank as a high level alarm or low level alarm. Fields of Application: Guard circuit optimizes performance in coating type media Submersible PP sensor body and cable for corrosive liquids 60VA relay selectable NO or NC via power supply wiring polarity Compatible with Smart Trak and Switch-Pak installation fittings
| Brand | Flowline |
|---|---|
| Product Type | Sensor |
| Max Temperature | 176°F (80°C) |
| Max Pressure | 150 psi (10 bar) @ 25° C., derated @ 1.667 psi (0.113 bar) per °C. above 25° C. |
| Voltage | 12-36 VDC |
| Accuracy | +/- 1mm in water |
| Cable Length | 10ft (3m) |
| Cable Type | 4-conductor, shielded #22 AWG |
| Conductivity Range | > 100 μ |
| Cable Material | Polypropylene |
| Consumption | 25 mA maximum |
| Contact Rating | 60 VA, 1A maximum |
| Contact Type | 1 SPST relay |
| Gasket Material | Viton (G version only) |
| Material - Sensor | Polypropylene |
| Sensor Rating | NEMA 6 (IP68) |
| Process Mount | 3/4 in NPT |
