Flowline LO10-2425 Level Switch | Liquid Level Control System
Flowline LO10-2425 Level Switch for Industrial Liquid Level Monitoring, Tank Automation and Process Control
Use Flowline LO10-2425 Level Switch for industrial level applications. Confirm range, mounting, output and process compatibility before purchase.
Flowline LO10-2425 Product Overview
The Flowline LO10-2425 is a Switch-Tek Optic Leak Detection Switch designed for industrial liquid-level measurement, monitoring or control applications. Use the exact model number when comparing replacement or new-installation requirements, because connection, output, range and enclosure options can vary across Flowline configurations.
What to Confirm Before Ordering
- Exact Flowline model: LO10-2425
- Required measurement or switching function
- Process connection and mounting arrangement
- Electrical and output requirements
- Process-fluid and environmental compatibility
Available Product Information
- Accuracy: +/- 1mm in water
- Material: PFA, Sensor length PFA
- Process Mount: PFA
- Supply Voltage: 12-36 VDC
- Output: Selectable NO / NC
- Orientation: Universal
- Repeatibility: +/- 0.5mm in water
- Consumption: 25 mA maximum
- Contact type: SPST relay
- Contact rating: 60 VA, 1A maximum
Practical Use and Maintenance
For replacement work, record the existing model number and wiring or mounting arrangement before removal. For new projects, review the documented installation guidance and leave adequate clearance around the sensing area. Commission the device using the applicable Flowline instructions and verify the output or switching behavior before returning the process to normal operation.
Before purchase, compare the complete model code with the application requirements. Check tank dimensions, process connection, wetted materials, power or signal needs, measurement range and environmental conditions where those values apply. This helps prevent selecting a similar-looking Flowline model with a different configuration.
For maintenance teams, integrators and OEM users searching for Flowline LO10-2425, the model-specific identification makes it easier to match the product to a documented Flowline level-control system without relying on appearance alone.
| Part No | LO10-2425 |
|---|---|
| Brand | Flowline |
| Product Type | Level Switch |
| Orientation | Universal |
| Accuracy | +/- 1mm in water |
| Repeatibility | +/- 0.5mm in water |
| Supply voltage | 12-36 VDC |
| Consumption | 25 mA maximum |
| Contact type | SPST relay |
| Contact rating | 60 VA, 1A maximum |
| Contact output | Selectable NO / NC |
| Process temperature | F: -40° to 176°, C: -40° to 80° |
| Pressure | 150 psi (10 bar) @ 25° C, derated @ 1.667 psi (0.113 bar) per °C above 25° C |
| Sensor rating | NEMA 6 (IP68): PP, NEMA 4X (IP65): PFA |
| Sensor material | -1XX5: Polypropylene, -2XX5: PFA |
| Cable jacket | -1XX5: Polypropylene, -2XX5: PFA |
| Cable type | 4-conductor, shielded #22 AWG |
| Cable length | 10in (3m) |
| Process mount | 3/4in NPT (3/4in G/Rp) |
| Mount. gasket | Viton (G version only) |
| Classification | General purpose |
| Compliance | CE |
