Flowline LO10-1425 Level Switch | Liquid Level Control System
Flowline LO10-1425 Level Switch for Industrial Liquid Level Monitoring, Tank Automation and Process Control
Use Flowline LO10-1425 Level Switch for industrial level applications. Confirm range, mounting, output and process compatibility before purchase.
Flowline LO10-1425 for Liquid Level Systems
The Flowline LO10-1425 is a Switch-Tek Optic Leak Detection Switch designed for industrial liquid-level measurement, monitoring or control applications. Use the exact model number when comparing replacement or new-installation requirements, because connection, output, range and enclosure options can vary across Flowline configurations.
Performance and Construction Highlights
- Submersible polypropylene or PFA Teflon sensor and cable for corrosive liquids
- 60VA relay selectable NO or NC via power supply wiring polarity
- Fail-safe leak sensor inverts wet to alert user for maintenance
System Integration
Match the model to the controller, PLC, relay, display or other receiving equipment used in the system. Confirm signal type and power requirements from the product documentation before wiring. Mechanical fit and process compatibility should also be verified before installation.
Before purchase, compare the complete model code with the application requirements. Check tank dimensions, process connection, wetted materials, power or signal needs, measurement range and environmental conditions where those values apply. This helps prevent selecting a similar-looking Flowline model with a different configuration.
Service-Friendly Ordering
For maintenance teams, integrators and OEM users searching for Flowline LO10-1425, the model-specific identification makes it easier to match the product to a documented Flowline level-control system without relying on appearance alone.
For replacement work, record the existing model number and wiring or mounting arrangement before removal. For new projects, review the documented installation guidance and leave adequate clearance around the sensing area. Commission the device using the applicable Flowline instructions and verify the output or switching behavior before returning the process to normal operation.
| Part No | LO10-1425 |
|---|---|
| Brand | Flowline |
| Product Type | Level Switch |
| Orientation | Universal |
| Accuracy | +/- 1mm in water |
| Repeatibility | +/- 0.5mm in water |
| Supply voltage | 12-36 VDC |
| Consumption | 25 mA maximum |
| Contact type | SPST relay |
| Contact rating | 60 VA, 1A maximum |
| Contact output | Selectable NO / NC |
| Process temperature | F: -40° to 176°, C: -40° to 80° |
| Pressure | 150 psi (10 bar) @ 25° C, derated @ 1.667 psi (0.113 bar) per °C above 25° C |
| Sensor rating | NEMA 6 (IP68): PP, NEMA 4X (IP65): PFA |
| Sensor material | -1XX5: Polypropylene, -2XX5: PFA |
| Cable jacket | -1XX5: Polypropylene, -2XX5: PFA |
| Cable type | 4-conductor, shielded #22 AWG |
| Cable length | 10in (3m) |
| Process mount | 3/4in NPT (3/4in G/Rp) |
| Mount. gasket | Viton (G version only) |
| Classification | General purpose |
| Compliance | CE |
