Flowline LO10-1305 Level Switch | Liquid Level Control System

Flowline LO10-1305 Level Switch | Liquid Level Control System

Flowline LO10-1305 Level Switch for Industrial Liquid Level Monitoring, Tank Automation and Process Control
SKU:LO10-1305
Model Number: LO10-XXX5
$220.000

Use Flowline LO10-1305 Level Switch for industrial level applications. Confirm range, mounting, output and process compatibility before purchase.


WHERE TO BUY?
Overview
Specification
Documents
Overview

Flowline LO10-1305: Selection and Application Guide

The Flowline LO10-1305 is a Switch-Tek Optic Leak Detection Switch designed for industrial liquid-level measurement, monitoring or control applications. Use the exact model number when comparing replacement or new-installation requirements, because connection, output, range and enclosure options can vary across Flowline configurations.

Specification Snapshot

  • Accuracy: +/- 1 mm in water
  • Material: PP, Sensor length Short
  • Process Mount: 3/4" NPT (US)
  • Supply Voltage: 12-36 VDC
  • Output: Selectable NO/NC
  • Orientation: Universal
  • Repeatability: +/- 0.5 mm in water
  • Consumption: 25 mA maximum
  • Contact type: SPST relay
  • Contact rating: 60 VA

Customer Selection Notes

Before purchase, compare the complete model code with the application requirements. Check tank dimensions, process connection, wetted materials, power or signal needs, measurement range and environmental conditions where those values apply. This helps prevent selecting a similar-looking Flowline model with a different configuration.

Installation and Commissioning

For replacement work, record the existing model number and wiring or mounting arrangement before removal. For new projects, review the documented installation guidance and leave adequate clearance around the sensing area. Commission the device using the applicable Flowline instructions and verify the output or switching behavior before returning the process to normal operation.

Maintenance Considerations

During service, inspect mounting threads, seals, wiring, cable entries and nearby process hardware as applicable. If the product is being replaced because of unstable readings or switching, verify the installation conditions before assuming the instrument itself is the only cause.

For maintenance teams, integrators and OEM users searching for Flowline LO10-1305, the model-specific identification makes it easier to match the product to a documented Flowline level-control system without relying on appearance alone.

Specification
Part NoLO10-1305
BrandFlowline
Product TypeLevel Switch
OrientationUniversal
Accuracy+/- 1 mm in water
Repeatability+/- 0.5 mm in water
Supply voltage12-36 VDC
Consumption25 mA maximum
Contact typeSPST relay
Contact rating60 VA
Contact outputSelectable NO/NC
Process temperatureF: -40° to 176°, C: -40° to 80°
Pressure150 psi (10 bar) @ 25°, derated @ 1.667 psi (.113 bar) per°. above 25°.
Sensor ratingNEMA 6 (IP68): PP NEMA 4X (IP65): PFA
Sensor material1XX5: PP, 2XX5: PFA
Cable jacket material1XX5: PP, 2XX5: PFA
Cable type4-conductor, #22 AWG (shielded)
Cable lengthStandard: 10ft (3m) Special order: 25ft (7.6m) or 50ft (15.2m)
Process mount3/4
Mount. gasketViton (G version only)
ClassificationGeneral purpose
CE complianceEN 61326 EMC EN 61010-1 safety
Documents

Related Documents List