Flowline US06-0001-00 Level Sensor | Liquid Level Control System
Flowline US06-0001-00 Level Sensor for Industrial Liquid Level Monitoring, Tank Automation and Process Control
Use Flowline US06-0001-00 Level Sensor for industrial level applications. Confirm range, mounting, output and process compatibility before purchase.
Industrial Level Control with Flowline US06-0001-00
The Flowline US06-0001-00 is a Reflective Ultrasonic Liquid & Solids Level Sensor Transmitter, 8" to 19 designed for industrial liquid-level measurement, monitoring or control applications. Use the exact model number when comparing replacement or new-installation requirements, because connection, output, range and enclosure options can vary across Flowline configurations.
Where This Model Fits
This Flowline configuration is intended for level-related process applications where reliable model matching and documented installation parameters are important. It may be used as part of monitoring, alarm, pump-control or measurement systems depending on the model configuration.
Documented Features
- Offered in 6m (19.6') and 12m (39.3') measurement ranges
- Reflective Technology measures reliably with condensation
- Corrosion resistant PVDF transducer with aluminum enclosure
- Narrow 3" (7.6cm) beam width for applications with limited space
- LCD display indicates level in inches, meters or percent of span
- Fail-safe diagnostics with selectable fail-safe signal outputs
Before purchase, compare the complete model code with the application requirements. Check tank dimensions, process connection, wetted materials, power or signal needs, measurement range and environmental conditions where those values apply. This helps prevent selecting a similar-looking Flowline model with a different configuration.
Ordering Checklist
- Confirm part number US06-0001-00
- Compare range and connection requirements
- Verify electrical/output requirements when applicable
- Check wetted-material compatibility with the process
For maintenance teams, integrators and OEM users searching for Flowline US06-0001-00, the model-specific identification makes it easier to match the product to a documented Flowline level-control system without relying on appearance alone.
| Part No | US06-0001-00 |
|---|---|
| Brand | Flowline |
| Product Type | Level Sensor |
| Series | US06 |
| Range | 8" to 19.6' (20cm to 6m) |
| Accuracy | ± 0.2% of range |
| Resolution | 0.079" (2mm) |
| Dead band | 8" (20.3cm) |
| Beam width | 3" (7.6cm) |
| Configuration | Push button or WebCal ® PC Windows ® USB ® 2.0 |
| Memory | Non-volatile |
| Display type | LCD, 6-digit |
| Display units | Inch, cm or percent |
| Supply voltage | 14-28 VDC |
| Loop resistance | 500 ohms @ 24 VDC |
| Signal output | 4-20mA, two-wire |
| Signal invert | 4-20mA or 20-4mA |
| Signal fail-safe | 4mA, 20mA, 21mA, 22mA, hold last value |
| Process temp. | F: -40° to 176°, C: -40° to 80° |
| Temp. comp. | Automatic |
| Ambient temp. | F: -40° to 176°, C: -40° to 80° |
| Pressure | 30 psi (2 bar) |
| Enclosure rating | Type 4X (IP66) |
| Encl. material | Aluminum |
| Enclosure vent | Water tight membrane |
| Conduit entrance | 1/2" NPT |
| Transducer type | Reflective |
| Transducer mat. | Polyvinylidene fluoride |
| Process mount | 06-0001: 2" NPT, 06-0011: 2" G, 12-0001: 3" NPT, 12-0011: 3" G |
| Mount gasket | -0001: N/a, -0011: Viton® |
| Classification | Intrinsically safe |
| Approvals | CSA for Canada: Class I, Division 1, Groups A, B, C and D T4; Class II, Division 1, Groups E, F and G T4; Class III, T135C; Ex ia IIC T4 Ga; Ex ia IIIC, T135C Da; CSA for U.S.: Class I, Division 1, Groups A, B, C and D T4; Class II, Division 1, Groups E, F and G T4; Class III, T135C; Class I, Zone 0, IIC AEx ia T4 Ga; Class II, Zone 20, IIC AEx ia, T135C Da |
| Entity parameters | Install per control drawing #600820 |
| Power & Return | 2-pin quick connect terminal block |
| WebCal Connect. | 2-pin quick connect terminal block |
| Display Connect. | 5-pin plug and socket |
| Compliance | CE, RoHS |
