Flowline AZ18-1130 Level Switch | Liquid Level Control System
Flowline AZ18-1130 Level Switch for Industrial Liquid Level Monitoring, Tank Automation and Process Control
Use Flowline AZ18-1130 Level Switch for industrial level applications. Confirm range, mounting, output and process compatibility before purchase.
Flowline AZ18-1130: Selection and Application Guide
The Flowline AZ18-1130 is a Switch-Pro with Compact Junction Box Level Controls designed for industrial liquid-level measurement, monitoring or control applications. Use the exact model number when comparing replacement or new-installation requirements, because connection, output, range and enclosure options can vary across Flowline configurations.
Specification Snapshot
- Accuracy: ±
- Wetted Material: PP/Ryton
- Material: based upon your application media
- Process Mount: NPT (US)
- Enclosure Rating: NEMA 4X (IP65)
- Sensor Technology: Vibration
- Output: Selectable NO / NC
- Repeatability: ±0.5mm in water
- Consumption: 25 mA maximum
- Contact Type: SPST relay
Customer Selection Notes
Before purchase, compare the complete model code with the application requirements. Check tank dimensions, process connection, wetted materials, power or signal needs, measurement range and environmental conditions where those values apply. This helps prevent selecting a similar-looking Flowline model with a different configuration.
Installation and Commissioning
For replacement work, record the existing model number and wiring or mounting arrangement before removal. For new projects, review the documented installation guidance and leave adequate clearance around the sensing area. Commission the device using the applicable Flowline instructions and verify the output or switching behavior before returning the process to normal operation.
Maintenance Considerations
During service, inspect mounting threads, seals, wiring, cable entries and nearby process hardware as applicable. If the product is being replaced because of unstable readings or switching, verify the installation conditions before assuming the instrument itself is the only cause.
For maintenance teams, integrators and OEM users searching for Flowline AZ18-1130, the model-specific identification makes it easier to match the product to a documented Flowline level-control system without relying on appearance alone.
| Part No | AZ18-1130 |
|---|---|
| Brand | Flowline |
| Product Type | Level Switch |
| Accuracy | ±1mm in water |
| Repeatability | ±0.5mm in water |
| Consumption | 25 mA maximum |
| Contact Type | SPST relay |
| Contact Rating | 60 VA, 1A maximum |
| Contact Output | Selectable NO / NC |
| Process Temperature | -40°F to 176°F (-40°C to 80°C) |
| Ambient Temperature | -40°F to 140°F (-40°C to 60°C) |
| Pressure | 150 psi (10 bar) |
| Enclosure Rating | NEMA 4X (IP65) |
| Enclosure Material | PP, UL94VO |
| Terminal Strip | 6-pole, socket |
| Conduit Entrance | 1/2in NPT |
| Wetted material | AZ18-113X: PP-Ryton® AU18-113X: PP AU18-213X: PFA |
| Process Mount | 3/4in NPT (3/4in G) |
| Mount Gasket | Viton |
| Classification | General Purpose |
| Compliance | CE |
| Type | Compact Junction Box |
| Series | AX18 |
