Flowline AU13-5217-A Switch-Pak Level Controller | Liquid Level
Flowline AU13-5217-A Switch-Pak Level Controller for Reliable Tank Level Measurement, Monitoring and Process Control
Use Flowline AU13-5217-A Switch-Pak Level Controller for industrial level applications. Confirm range, mounting, output and process compatibility
Flowline AU13-5217-A Product Overview
The Flowline AU13-5217-A is a with Compact Level Controller designed for industrial liquid-level measurement, monitoring or control applications. Use the exact model number when comparing replacement or new-installation requirements, because connection, output, range and enclosure options can vary across Flowline configurations.
What to Confirm Before Ordering
- Exact Flowline model: AU13-5217-A
- Required measurement or switching function
- Process connection and mounting arrangement
- Electrical and output requirements
- Process-fluid and environmental compatibility
Available Product Information
- Accuracy: +/- 1mm in water
- Wetted Material: PVDF
- Material: -X21X: PP, UL94VO & PC / -X22X: PP, UL94VO
- Process Mount: 1 1/2" G (Metric)
- Supply Voltage: 120 / 240 VAC @ 50-60 Hz
- Enclosure Rating: NEMA 4X (IP65)
- Sensor Technology: Ultrasonic
- Output: Selectable NO / NC
- Length: 6in to 10ft (15cm to 3m)
- Repeatability: +/- 0.5mm in water
Practical Use and Maintenance
For replacement work, record the existing model number and wiring or mounting arrangement before removal. For new projects, review the documented installation guidance and leave adequate clearance around the sensing area. Commission the device using the applicable Flowline instructions and verify the output or switching behavior before returning the process to normal operation.
Before purchase, compare the complete model code with the application requirements. Check tank dimensions, process connection, wetted materials, power or signal needs, measurement range and environmental conditions where those values apply. This helps prevent selecting a similar-looking Flowline model with a different configuration.
For maintenance teams, integrators and OEM users searching for Flowline AU13-5217-A, the model-specific identification makes it easier to match the product to a documented Flowline level-control system without relying on appearance alone.
| Part No | AU13-5217-A |
|---|---|
| Brand | Flowline |
| Product Type | Level Controller |
| Product Family | Switch-Pak |
| Length | 6in to 10ft (15cm to 3m) |
| Accuracy | +/- 1mm in water |
| Repeatability | +/- 0.5mm in water |
| Orientation | +/- 20° vertical |
| Switch points | 1 (factory set) |
| Supply voltage | 120 / 240 VAC @ 50-60 Hz |
| LED indication | Sensor, power & relay |
| Consumption | 0.25A maximum |
| Strobe type | -X22X: N/A, -X21X: Xenon tube |
| Strobe flash | -X22X: N/A, -X21X: 1 per second |
| Contact type | SPDT relay |
| Contact rating | 250 VAC @ 10A |
| Contact output | Selectable NO / NC |
| Contact delay | 0-60 seconds |
| Process temperature | F: -40° to 176°, C: -40° to 80° |
| Ambient temperature | F: -40° to 140°, C: -40° to 60° |
| Pressure | AV13: 25 psi (1.7 bar) AU13 / AZ13: 150 psi (10 bar) |
| Enclosure rating | NEMA 4X (IP65) |
| Enclosure material | -X21X: PP, UL94VO & PC / -X22X: PP, UL94VO |
| Conduit entrance | 1/2in NPT |
| Wetted material | AV13-42XX: PP, AU13-42XX: PP, AU13-52XX: PVDF, AZ13-42XX: PP-Ryton |
| Process mount | -X2X3: 2in NPT -X2X7: 1 1/2in G |
| Classification | General purpose |
| Compliance | CE |
