Flowline XP89-0 Ultrasonic Level Transmitter XP89-0
Echosafe Ultrasonic Level Transmitter of Flowline with Supply voltage
SKU:XP89-0
Model Number: XP8X-0
$0.000
Flowline XP89-0 Echosafe Ultrasonic Level Transmitter. Sensor range 10m (32.8'), Resolution 0.079 in (2mm), Non-volatile Memory, Explosion proof
WHERE TO BUY?
Application
FM approved for hazardous environments, the explosion proof ultrasonic level transmitter provides continuous level measurement up to 32.8' (10m) with a 4-20 mA signal output, and is configured via the integral push button display module. This non-contact liquid level sensor is ideally suited for corrosive, ultrapure, sticky or dirty liquids, and is widely selected for bulk storage, day tank, lift station and process tank level applications located in a classified area.
Fields of Application:
- Explosion proof level transmitter for use in hazardous areas
- Offered in 2 measurement ranges from 26.2' (8m) to 32.8? (10m)
- Configuration is simple via integral push button display module
- Type 4 aluminum XP windowed enclosure with dual conduit ports
- LCD display indicates level in inches, centimeters or percent of span
- Narrow 3" beam width for applications with limited measurement space
- Rugged PVDF transducer and process mounting plug for corrosive liquids
- Automatic temperature compensation for accurate measurement
| Range | XP88: 8in to 26.2ft (20cm to 8m) / XP89: 8in to 32.8ft (20cm to 10m) |
|---|---|
| Accuracy | +/- 0.2% of range |
| Resolution | 0.079 in (2mm) |
| Dead band | 8 in (20cm) |
| Beam width | 3in (7.6cm) |
| Configuration | Push button |
| Memory | Non-volatile |
| Display type | LCD, 6-digit |
| Display units | Inch, cm, percent, feet or meter |
| Supply voltage | 18-28 VDC (loop) |
| Loop resist. | 250 Ohms max @ 24 VDC |
| Signal output | 4-20 mA, two-wire |
| Signal invert | 4-20 mA or 20-4 mA |
| Signal fail-safe | 4 mA, 20mA, 21 mA, 22 mA or hold last |
| Process temp. | F: -4° to 140°, C: -20° to 60° |
| Temp. comp. | Automatic |
| Electronics temp. | F: -40° to 160°, C: -40° to 71° |
| Pressure | MWP = 30 psi (2 bar) |
| Enclosure rating | Type 4X |
| Enclosure mat. | Aluminum |
| Window material | Glass |
| Conduit entrance | Dual, 1/2in NPT |
| Trans. material | PVDF |
| Process mount | 2in NPT |
| Mount gasket | Viton |
| Classification | Explosion proof |
| Compliance | CE, RoHS |
| Approvals | FM: Class I, Div I / Groups A, B, C, D / Class II/III, Div I / Groups E, F, G |
