LR25-0310-60 Flowline Radar Level Transmitters LR25-0310-60
Radar Level Transmitters of Flowline with Frequency 6.3 GHz.
Flowline LR25-0310-60 Radar Level Transmitters. Flange size 6in ANSI, Range 12in to 114.8in (30cm to 35m), Supply voltage 16-26 VDC
The general purpose 6.3 GHz. pulse radar level transmitter provides continuous level measurement up to 114.8' (35m) with a 4-20 mA signal output, and is configured via its integral push button display module. The non-contact liquid level sensor is intended for chemical and petroleum storage or process applications in above grade metal or reinforced concrete tanks or below grade tanks of any material. Select this sensor for harsh application conditions with corrosive or low dielectric media, heavy surface foam or agitation, higher pressure, steam, condensation or vapor, and installation in a flange fitting. Due to the wider beam angle, special attention should be given to ensure that the sensor is located with unobstructed measurement space.
- 316 L antenna with PTFE inner shield for corrosive media
- Simple configuration via integral push button display module
- 6.3 GHz. pulse radar is unaffected by most foam and agitation
- 12"(30cm) dead band enables utilization of the entire tank
- LCD displays level in feet or meters with percent of span bar
- Optional display mode indicates the echo signal return curve
- Auto-temperature compensation for accurate measurement
- Fail-safe diagnostics with selectable signal fail-safe outputs
- Recognition, storage and rejection of false echo signal returns
- Rugged IP67 aluminum enclosure with polycarbonate window
| Range | 12in to 114.8in (30cm to 35m) |
|---|---|
| Frequency | 6.3 GHz. |
| Accuracy | +/- 10mm |
| Dead band | 12 |
| Beam angle | 20° |
| Configuration | Push button |
| Memory | Non-volatile |
| Display type | LCD, dot matrix |
| Display units | Feet and meters |
| Display bar | Percent of span |
| Display graph | Echo signal curve |
| Supply voltage | 16-26 VDC |
| Max. consumption | 22.5 mA |
| Signal output | 4-20 mA, two-wire |
| Signal invert | 4-20 mA, 20-4 mA |
| Signal fail-safe | 3.9 mA, 20.5 mA, 22 mA |
| Process temperature | F: -40° to 266°, C: -40° to 130° |
| Temperature comp. | Automatic |
| Storage Temperature | F: -40° to 176°, C: -40° to 80° |
| Pressure | -14.5 to 580 psi (-1 to 40 bar) |
| Enclosure rating | IP67 |
| Encloser material | Aluminum w/silicone gasket |
| Encloser window mat. | Polycarbonate |
| Conduit entrance | 1/2 |
| Antenna material | 316 L w/PTFE inner shield |
| Process mount | 40: 4 |
| Classification | General purpose |
| Certification | cTUVus, FCC |
| Compliance | CE, CRN, RoHS |
