Flowline LP50-5005 Guard Capacitance Level Switch LP50-5005
Switch-Tek Capacitance Level Switch of Flowline with Supply voltage 12-36 VDC
SKU:LP50-5005
Model Number: LP50-X005
$0.000
Flowline LP50-5005 Switch-Tek Non-Intrusive Capacitance Level Switch. Enclosure rating NEMA 4X (IP65), Bracket material PVDF
WHERE TO BUY?
Application
The general purpose non-intrusive capacitance level switch provides reliable liquid level detection of water based conductive liquids with non-coating and/or scaling characteristics with a 1A relay output. Media examples include hydrochloric, sulfuric acid and water. The liquid level sensor is bracket mounted on the exterior wall of non-metallic tanks and applied as a high level alarm or low level alarm.
Features:
- Non-intrusive level detection through plastic or fiberglass walls
- Installed with polyethylene, polypropylene or PVDF adhesive 3M mounting brackets
- Rugged PSO enclosure rated NEMA 4X with conduit connector
- 60VA relay selectable NO or NC via power supply wiring polarity
| Accuracy | ± 1mm in water |
|---|---|
| Dielectric Range | > 10 constants |
| Conductive Range | > 100 μ |
| Supply Voltage | 12-36 VDC |
| Consumption | 25 mA Maximum |
| Contact Type | SPST Relay |
| Contact Rating | 60 VA, 1A Maximum |
| Contact Output | Selectable NO / NC |
| Process Temperature | -40°F to 176°F (-40°C to 80°C) |
| Enclosure Rating | NEMA 4X (IP65) |
| Enclosure Material | PSO |
| Cable Jacket Material | Polypropylene |
| Cable Type | 4-conductor, shielded #22 AWG |
| Cable Length | 10ft (3m) |
| Conduit Entrance | 1/2in NPT |
| Tank Material Comp | Non-metallic |
| Tank Mounting | Bracket w/3M adhesive, plastic thermal weld |
| Tank Wall Thickness | < 1 |
| Classification | General purpose |
| Compliance | CE |
| Type | Level Switch |
| Series | LP50 |
No matching products found.
