Flowline LH29-1001 Switch-Tek Leak Detection Switch LH29-1001
LH29 Switch-Tek Interstitial Leak Detection Switch of Flowline
Flowline LH29-1001 Switch-Tek Interstitial Leak Detection Switch
Orientation: Horizontal, Contact type: (1) SPST reed, Contact state: NC, Open on rise, Contact rating: 30 watts 240 VAC (0.14 amps resistive) 120 VAC (0.28 amps resistive) 120 VDC (0.07 amps resistive) 24 VDC (0.28 amps resistive), Contact output: NC (opens on rise), Process temperature: F: -40° to...
The general purpose float leak switch provides reliable leak detection in and around secondary containment sumps and tanks with a 1A relay output. The flat body Valox leak sensor is ideal for placement in hard to reach interstitial areas with limited space. In the event of a leak, the foam polypropylene float will rise to signal the presence of unwanted liquid in the containment vessel. The leak detection switch is typically mounted flat on the bottom of the sump floor or secondary containment tank wall.
- Valox sensor body with PP float and Halar® jacketed cable for corrosive liquids
- Flat, low profile sensor with minimal float rise for applications with limited space
- Dry contact, normally closed reed switch opens to signal the presence of liquid
| Orientation | Horizontal |
|---|---|
| Contact type | (1) SPST reed |
| Contact state | NC, Open on rise |
| Contact rating | 30 watts 240 VAC (0.14 amps resistive) 120 VAC (0.28 amps resistive) 120 VDC (0.07 amps resistive) 24 VDC (0.28 amps resistive) |
| Contact output | NC (opens on rise) |
| Process temperature | F: -40° to 221°, C: -40° to 105° |
| Pressure | 50 psi (3.44 bar) |
| Float material | Foamed polypropylene |
| Body material | Valox 420 |
| Pivot pin | Stainless steel |
| Wire type | 2 conductor, #22 AWG |
| Wire length | 10ft (3.04m) |
| Wire jacket material | Halar jacketed |
| Classification | General purpose |
| Compliance | CE |
| Approvals | UL |
