Flowline GT10-5405 Gas Flow Switch GT10-5405
GT10 Series Flow Switch with 14-36 VDC Supply Voltage, NEMA 4X (IP65) Sensor Rating
SKU:GT10-5405
Model Number: GT10
$485.000
Flowline Thermo-Flo GT10-5405 Gas Flow Switch. Set Point Range 1 to 90 fps (0.3 to 27 mps), Wetted Material PVDF.
WHERE TO BUY?
Flowline GT10 Series Gas Flow Switch
- Rugged PVDF sensor for corrosive liquids and gases
- Adjustable set point with LED for flow or no-flow status indication
- 60VA relay selectable NO or NC via power supply wiring polarity
- Solid state sensor is not damaged by over-ranging flow velocities
| Type | Flow Switch |
|---|---|
| Series | GT10 |
| Set Point Range | 1 to 90 fps (0.3 to 27 mps) |
| Factory Set Point | ± 0.5% of set point @ fixed temperature |
| Response Time | 1-10 Seconds |
| Set Point Adjust. | Potentiometer |
| Viscosity Range | N/A |
| LED Indication | Flow Status |
| Supply Voltage | 14-36 VDC |
| Consumption | 70 mA Maximum |
| Contact Type | (1) SPST Relay |
| Contact Rating | 60 VA, 1A Maximum |
| Contact Output | Selectable NO/NC |
| Process Temperature | 32°F to 140°F (0°C to 60°C) |
| Ambient Temperature | -40°F to 140°F (-40°C to 60°C) |
| Pressure | 150 psi (10 bar) @ 25° C, derated @ 1.667 psi (0.113 bar) per °C above 25° C |
| Sensor Rating | NEMA 4X (IP65) |
| Wetted Material | PVDF |
| Cable Jacket Material | FEP |
| Cable Type | 4-conductor, shielded #22 AWG |
| Cable Length | 10 ft (3m) |
| Process Mount | 3/4 in NPT (3/4 in G/R) |
| Mount Gasket | Viton |
| Classification | General Purpose |
| Compliance | CE |
No matching products found.
