FT10-1305 Flowline Flow Switch FT10-1305
Flow Switch Level Controls of Flowline with Mount Gasket = Viton, Sensor material = PP / Ryton
Flowline FT10-1305 Level Controls Flow Switches, Sensor length Short
Set point range: 1 to 90 fps (0.3 to 27 mps), Factory set point: 2fps (.06 mps), Repeatability: +/- 0.5% of set point @ fixed temperature, Response time: 1-10 seconds, Set point adjust: Potentiometer, Viscosity range: 1-200 centipoise, LED indication: Flow status, Supply voltage: 12-36 VDC, Consumpt...
Offered in liquid and gas sensor types, the general purpose flow switch provides reliable low or no-flow detection of relatively clean, non-coating media with one 1A relay output. Liquid examples include water and acetic acid. Available in Polypropylene-Ryton® and PVDF, the short flow sensor is used in pipe or ducting from 1/2" to 1 1/2", and the long flow sensor is used in 2" and up. The flow switch set point may be adjusted from 0.04 to 3 fps in liquids, or 1 to 90 fps in gases as a low-flow alarm. The flow sensor is best applied in applications with relatively constant temperature.
- Rugged Polypropylene-Ryton or PVDF sensor for corrosive liquids and gases
- Adjustable set point with LED for flow or no-flow status indication
- 60VA relay selectable NO or NC via power supply wiring polarity
- Solid state sensor is not damaged by over-ranging flow velocities
| Set point range | 1 to 90 fps (0.3 to 27 mps) |
|---|---|
| Factory set point | 2fps (.06 mps) |
| Repeatability | +/- 0.5% of set point @ fixed temperature |
| Response time | 1-10 seconds |
| Set point adjust | Potentiometer |
| Viscosity range | 1-200 centipoise |
| LED indication | Flow status |
| Supply voltage | 12-36 VDC |
| Consumption | 70 mA maximum |
| Contact type | SPST relay |
| Contact rating | 60 VA, 1A maximum |
| Contact output | Selectable NO / NC |
| Process temp. | F: 32° to 140°, C: 0° to 60° |
| Ambient temp. | F: -40° to 140°, C: -40° to 60° |
| Pressure | 150 psi (10 bar) @ 25° C, derated @ 1.667 psi (0.113 bar) per °C above 25° C |
| Sensor rating | NEMA 4X (IP65) |
| Wetted material | -1XX5: PP-Ryton , -5XX5: PVD |
| Cable jacket | -1XX5: PP , -5XX5: PFA |
| Cable type | 4-conductor, shielded #22 AW |
| Cable length | 10ft (3m) |
| Process mount | 3/4 in NPT (3/4in G) |
| Mount. gasket | Viton |
| Classification | General purpose |
| Compliance | CE |
