DL14-10 Flowline Ultrasonic Level Transmitter DL14-10
Level Transmitter of Flowline with Polycarbonate Enclosure Material
SKU:DL14-10
Model Number: DL14-XX
$500.000
DL14-10 General Purpose Non-volatile Level Transmitter, 1" NPT, Operating rangle 24 VDC, Output voltage is between 4 to 20mA
WHERE TO BUY?
Application
The general purpose ultrasonic level transmitter provides continuous level measurement up to 49.2 inch (1.25m) witha4-20mAsignaloutput,andis configured via our free Webcal software. The embedded level controller can lower cost by replacing external control hardware. This non-contact liquid level sensor is ideally suited for corrosive, sticky or dirty liquids, and is widely selected for small day tank, skid, IBC, sump and process tank level applications.
Fields of Application:
- Level detection, switch and control functions up to 49.2 inch (1.25m)
- Configuration is fast and easy via WebCal software and USB adapter
- Narrow 2 inch beam width and short 2 inch dead band optimized for small tanks
- Four (4) programmable relays rated @ 1A / 60VA for switch, pump or valve control and fail-safety
- 1 pump or valve with 3 alarms
- 2 pumps (lead-lag) with 2 alarms
- pumps (duplexing) with 2 alarms
- 4 independent switch point alarms
- PVDF transducer and 6P polycarbonate enclosure for corrosive liquids
- Automatic temperature compensation for accurate measurement
| Range | 49.2 |
|---|---|
| Accuracy | 0.125 |
| Resolution | 0.019 |
| Dead band | 2in (5cm) |
| Beam width | 2in (5cm) |
| Configuration | WebCal PC Windows USB 2.0 |
| Memory | Non-volatile |
| Supply voltage | 24 VDC (loop) |
| Consumption | 0.5W |
| Loop resist. | 400Ω max |
| Signal output | 4-20 mA, two-wire |
| Signal invert | 4-20 mA or 20-4 mA |
| Signal fail-safe | 4 mA, 20 mA, 21 mA, 22 mA or hold last |
| Contact type | SPST relays |
| Contact rating | 60 VA, 1A maximum |
| Contact fail-safe | Power loss: Hold last Power on: Open, close or hold last |
| Hysteresis | Selectable |
| Process temp. | F: 20° to 140° C: -7° to 60° |
| Temp. comp. | Automatic |
| Ambient temp. | F: -31° to 140° C: -35° to 60° |
| Pressure | MWP = 30 PSI (2 bar) |
| Enclosure rating | Type 6P, encapsulated, corrosion resistant & submersible |
| Enclosure mat. | Polycarbonate |
| Strain relief mat. | Santoprene |
| Trans. material | PVDF |
| Cable jacket | Polyurethane |
| Cable type | 9-conductor, shielded |
| Cable length | 48 |
| Process mount | 1 |
| Mount gasket | Viton |
| Classification | General purpose |
| Compliance | CE, RoHS |
| Approvals | cFMus |
