Flowline AT12-3610 Flow Switch with Compact Flow Controller AT12-3610
SKU:AT12-3610
Model Number: AT12
$1165.000
Flowline Thermo-Flo AT12-3610 Flow Switch with Compact Flow Controller
Type: Flow Controller, Series: AT12, Set Point Range: 0.04 to 3 fps (0.012 to 0.91 mps), Repeatability: ± 0.5% of Set Point, Response Time: 1-10 Seconds, Set Point Adjust.: Potentiometer, LED Indication: Sensor, Power & Relay, Supply Voltage: 120/240 VAC @ 50-60 Hz, Consumption: 0.25A maximum, Strob...
WHERE TO BUY?
Flowline Thermo-Flo™ AT12 with Compact Flow Controller
- Rugged PP-Ryton® or PVDF sensor for corrosive liquids and gases
- Fail-safe relay control of pumps or valves with 0-60 second delay
- PP enclosure rated NEMA 4X with swivel base for conduit alignment
- Optional strobe brings immediate attention to flow alarm conditions
- Invert switch changes relay state from NO to NC without rewiring
- Solid state sensor is not damaged by over-ranging flow velocities
| Type | Flow Controller |
|---|---|
| Series | AT12 |
| Set Point Range | 0.04 to 3 fps (0.012 to 0.91 mps) |
| Repeatability | ± 0.5% of Set Point |
| Response Time | 1-10 Seconds |
| Set Point Adjust. | Potentiometer |
| LED Indication | Sensor, Power & Relay |
| Supply Voltage | 120/240 VAC @ 50-60 Hz |
| Consumption | 0.25A maximum |
| Strobe Type | Xenon tube |
| Strobe Flash | 1 Per Second |
| Contact Type | (1) SPDT Relay |
| Contact Rating | 250 VAC @ 10A |
| Contact Output | Selectable NO/NC |
| Contact Delay | 0-60 Seconds |
| Process Temperature | 32°F to 140°F (0°C to 60°C) |
| Ambient Temperature | -40°F to 140°F (-40°C to 60°C) |
| Pressure | 150 psi (10 bar) @ 25° C, derated @ 1.667 psi (0.113 bar) per °C above 25° C |
| Enclosure Rating | PP, UL94VO & PC |
| Enclosure Material | NEMA 4X (IP65) |
| Conduit Entrance | 0.5in NPT |
| Wetted Material | PVDF |
| Process Mount | 3/4in NPT (3/4in G) |
| Mount Gasket | Viton |
| Classification | General Purpose |
| Compliance | CE |
