Flowline AG14-3620 Flow Switch AG14-3620
Flow Switches of Flowline with Response time 1-10 second
SKU:AG14-3620
Model Number: AG1X-X6XX
$0.000
Flowline AG14-3620 Flow Switches. Sensor material PVDF, Sensor length Long, Process mount NPT (US)
WHERE TO BUY?
Application
Offered in liquid and gas sensor types, the general purpose flow switch package provides reliable no or low-flow detection of relatively clean non-coating media with a 1A relay output and compact junction box for wiring termination. Liquid examples includes water and acetic acid. Available in PP-Ryton and PVDF, the short flow sensor is used in pipe or ducting from 1/2" to 1 1/2", and the long flow sensor is used in 2" and up. The flow switch set point may be adjusted from 0.04 to 3 fps in liquids, or 1 to 90 fps in gases as a low-flow alarm. The flow sensor is best applied in applications with relatively constant temperature.
Fields of Application:
- Rugged Polypropylene-Ryton or PVDF sensor for corrosive liquids and gases
- Adjustable set point with LED for flow or no-flow status indication
- Polypropylene enclosure rated NEMA 4X with swivel base for conduit alignment
- 60VA relay selectable NO or NC via power supply wiring polarity
- Solid state sensor is not damaged by over-ranging flow velocities
| Set point range | 1 to 90 fps, (0.3 to 27 mps) |
|---|---|
| Repeatability | +/- 0.5% of set point |
| Response time | 1-10 seconds |
| Set point adjust. | Potentiometer |
| LED indication | Sensor, power & relay |
| Supply voltage | 120 / 240 VAC @ 50-60 Hz |
| Consumption | 0.25A maximum |
| Strobe type | -X61X: Xenon tube, -X62X: N/A |
| Strobe flash | -X61X: 1 per second, -X62X: N/A |
| Contact type | SPDT relay |
| Contact rating | 250 VAC @ 10A |
| Contact output | Selectable NO / NC |
| Contact delay | 0-60 seconds |
| Process temperature | F: 32° to 140°, C: 0° to 60° |
| Ambient temperature | F: -40° to 140°, C: -40° to 60° |
| Pressure | 150 psi (10 bar) @ 25° C, derated @ 1.667 psi (0.113 bar) per °C above 25° C |
| Enclosure rating | NEMA 4X (IP65) |
| Enclosure material | -X61X: PP, UL94VO & PC / -X62X: PP, UL94VO |
| Conduit entrance | 1/2in NPT |
| Wetted material | -16XX: PP-Ryton, -36XX: PVDF |
| Process mount | 3/4in NPT (3/4” G) |
| Mount. gasket | Viton |
| Classification | General purpose |
| Compliance | CE |
