Flowline AG14-1620 Flow Switch AG14-1620
Flow Switches of Flowline with Response time 1-10 second
SKU:AG14-1620
Model Number: AG1X-X6XX
$0.000
Flowline AG14-1620 Flow Switches. Sensor material PP / Ryton, Sensor length Long, Process mount NPT (US)
WHERE TO BUY?
Application
Offered in liquid and gas sensor types, the general purpose flow switch package provides reliable no or low-flow detection of relatively clean non-coating media with a 1A relay output and compact junction box for wiring termination. Liquid examples includes water and acetic acid. Available in PP-Ryton and PVDF, the short flow sensor is used in pipe or ducting from 1/2" to 1 1/2", and the long flow sensor is used in 2" and up. The flow switch set point may be adjusted from 0.04 to 3 fps in liquids, or 1 to 90 fps in gases as a low-flow alarm. The flow sensor is best applied in applications with relatively constant temperature.
Fields of Application:
- Rugged Polypropylene-Ryton or PVDF sensor for corrosive liquids and gases
- Adjustable set point with LED for flow or no-flow status indication
- Polypropylene enclosure rated NEMA 4X with swivel base for conduit alignment
- 60VA relay selectable NO or NC via power supply wiring polarity
- Solid state sensor is not damaged by over-ranging flow velocities
| Set point range | 1 to 90 fps, (0.3 to 27 mps) |
|---|---|
| Repeatability | +/- 0.5% of set point |
| Response time | 1-10 seconds |
| Set point adjust. | Potentiometer |
| LED indication | Sensor, power & relay |
| Supply voltage | 120 / 240 VAC @ 50-60 Hz |
| Consumption | 0.25A maximum |
| Strobe type | -X61X: Xenon tube, -X62X: N/A |
| Strobe flash | -X61X: 1 per second, -X62X: N/A |
| Contact type | SPDT relay |
| Contact rating | 250 VAC @ 10A |
| Contact output | Selectable NO / NC |
| Contact delay | 0-60 seconds |
| Process temperature | F: 32° to 140°, C: 0° to 60° |
| Ambient temperature | F: -40° to 140°, C: -40° to 60° |
| Pressure | 150 psi (10 bar) @ 25° C, derated @ 1.667 psi (0.113 bar) per °C above 25° C |
| Enclosure rating | NEMA 4X (IP65) |
| Enclosure material | -X61X: PP, UL94VO & PC / -X62X: PP, UL94VO |
| Conduit entrance | 1/2in NPT |
| Wetted material | -16XX: PP-Ryton, -36XX: PVDF |
| Process mount | 3/4in NPT (3/4” G) |
| Mount. gasket | Viton |
| Classification | General purpose |
| Compliance | CE |
